Domains

Connect a domain to your website

Point your .hk or .com.hk domain at one of your projects in a few clicks. See host names, connection states, how to move or disconnect a name, and common fixes.

Once your domain is Active, you can connect it to one of your projects. We set up the DNS for you, so there is nothing to configure by hand. A project can show the bare domain (for example mybrand.hk), www, or another name under the domain such as shop.

What you need

Requirement Detail
An active domain Only a domain with the status Active or Expiring soon can be connected. A domain that is still being set up, expired, suspended or moving away cannot
A project in the same workspace The domain and the project must belong to the same workspace
The right role A workspace admin or a billing admin, and edit access to the project
Your site published Publish the project so the address has something to show. See Publish your website

If you do not have edit access to the project, the page says "You need edit access to that project to connect a host name to it."

Connect from the Domains page

  1. Open Domains and select the Connect to a project tab. Once your workspace owns a domain, the page opens on this tab.
  2. Find your project in the list. Each row shows the project and the names connected to it, each with a state badge.
  3. If a project has no domain, choose the domain in the list Domain to connect.
  4. Select Connect. The domain page opens on the Host names tab.
  5. Under "Put your site on" your domain, select Connect to and your project name.

We connect the bare domain and www, and set up the DNS records for you. Nothing else to do.

If you have only one project, it is chosen for you. If you have several, pick the project from the list before you connect.

Connect another name, such as shop

On the Host names tab select Use another name, such as shop, or use the Connect a host name box.

  1. Type the Host name. It must be the domain itself or a name under it, for example shop.mybrand.hk.
  2. Choose the Project.
  3. Select Connect.

What the states mean

A connected name has a state on the Connect to a project tab and a status on the Host names tab.

On the Connect to a project tab On the Host names tab Meaning
Live Connected Visitors reach your project at this name
Setting up Being set up The name was just connected. It can take a little while to reach everyone
Needs attention Needs attention The switch did not finish. Try Connect again, or contact support
Paused The domain is not serving (expired, suspended or moving away). The connection returns by itself when the domain recovers
Not connected Disconnected No project is attached

At the top of the domain page, four steps track the progress: Registered, Name servers set, Connected to a project and Live.

Move a name to another project

  1. Open the domain from Domains > My domains and select the Host names tab.
  2. Find the host name. It says "Points to project:" and the project name.
  3. Choose another project in the list.
  4. Select Move to this project.

To move a name you also need edit access to the project it is leaving.

Disconnect a name

  1. On the Host names tab, select Disconnect next to the name.
  2. Confirm with Yes, disconnect. The message says "The site stops opening at this address."

Disconnecting needs a workspace admin. A billing admin sees the button but is not allowed to complete it.

If your domain uses its own name servers

If you switched the domain to My own name servers, we cannot write the DNS for you. After you connect a name, the page shows "This domain uses its own name servers. Add these records at your DNS provider so the address reaches your project", followed by the record to add. Add it where your name servers are managed. See Name servers and contacts.

Publishing and your plan

Publishing updates to your own domain needs an active plan, or a free month that is still running. The publish panel shows "Free month: ends" with a date while the free month runs, and tells you when it has ended. See Your free month.

Fix common problems

Message What to do
That name already has an address record. Remove it under DNS first, then connect the project. The name has an address (A) record you or someone added. Remove it on the DNS tab. See Manage DNS records
That host name is already used by another project or domain. Choose another name, or move it from the other project
That is not a valid host name for this domain. Use the domain itself or a name under it, such as www
That host name is not part of this domain. You typed a different domain
Only an active domain can be connected to a project. Wait for the order to finish, or renew the domain
You need edit access to that project to connect a host name to it. Ask a project owner for edit access
We could not switch the host name over. Nothing was lost. Try again in a minute. Select Connect again
Connecting domains is not available right now. Please try again later. Try again later
This workspace has no projects to connect to yet. Create a project first

What happens when a domain expires

While a domain is not active, its connected names are paused and visitors cannot reach the site at that address. Renew in time. See Renew, transfer in and transfer out.